Site location: The 101 series of dispensers are an industry standard and can be used in any room or site location. The 101-J offers maximum towel capacity in a compact unit.

Features: Front loading for easy service and maintenance. All doors are hinged with full length stainless steel piano hinges. Product shipped with protective plastic coating to be removed after installation. Available with keyed tumbler lock to reduce pilferage and vandalism.

Materials: All welded construction of 20 and 22 gauge steel with white epoxy finish.

Dispensing: Universal paper towel dispenser will accept all standard roll towels (max. 7-1/4″ diameter and up to 10″ long). This includes almost all 425 ft. jumbo rolls and the Scott 500 ft. rolls.

Loading Instructions: Place standard roll towels inside the body of the unit. Pull loose end through the feeder. Leave some paper towel exposed so users can pull and tear their desired amount.

Weight: 2.7 kg. (6 lbs.)

Dimensions: 10.5″L x 9.5″W x 7.25″D

Installation: For unrestricted access bottom of unit to floor must not exceed 44″ (111.7).

Maintenance: Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners.

Warranty: Frost Products Ltd warrants that if any Frost product or Frost product part proves to be defective within 12 months from the date of shipment from the factory it will be repaired or replaced without any charge when authorized. Frost warranty does not cover damaged product due to neglect or mishandling. Frost warranty does not cover installation or removal costs. Discolouration to stainless steel parts resulting from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material and are not covered under warranty.